KENDALI JARAK JAUH MOTOR INDUKSI TIGA FASA BERBASIS IOT
Keywords:
induction motors, VSD, HMI, IoT, Modbus CommunicationAbstract
Induction motors have disadvantages in terms of speed regulation. Variable Speed Drive (VSD) allows limited induction motor speed settings. The use of industrial automation systems based on Programmable Logic Control (PLC) and Human Machine Interface (HMI) supported by the Internet of Things (IoT) makes it possible to regulate induction motors in large numbers at relatively the same time. The Modbus communication protocol used by current control devices makes communication between operator and user devices easier. This research produces a control system for two induction motors based on the Altivar 12, connected to an HMI and smartphone for remote control. An induction motor is set up by entering frequency value data and monitoring aspects of three-phase voltage and current, speed, and frequency.
References
Akbar, A., Basyar, G., Handoko, S., & Setiawan, I. (2021). IMPLEMENTASI INVERTER ALTIVAR 12 DAN TOSHIBA VFS15 SEBAGAI PENGENDALIAN KECEPATAN PADA MOTOR INDUKSI 3 FASA UNTUK APLIKASI SISTEM KONVEYOR TERKENDALI. Transient: Jurnal Ilmiah Teknik Elektro, 10(1), 184–189. https://doi.org/10.14710/TRANSIENT.V10I1.184-189
Anugrah, F., Yudha, K., Riyanta, B., Program, B., Mesin, S. T., Teknik, F., Muhammadiyah, U., & Brawijaya, Y. J. (2020). Perancangan dan Simulasi Trainer Human Machine Interface (HMI) untuk media pembelajaran berbasis CX Designer PLC. JMPM (Jurnal Material Dan Proses Manufaktur), 4(2), 136–145. https://doi.org/10.18196/JMPM.V4I2.10607
Faikar, R., Setiyono, B., & Sumardi, S. (2015). PERANCANGAN SISTEM ANTARMUKA BERBASIS HMI (HUMAN MACHINE INTERFACE) PADA MESIN YARN CONDITIONING PLANT DI PT. APAC INTI CORPORA. Transient: Jurnal Ilmiah Teknik Elektro, 4(3), 745–752. https://doi.org/10.14710/TRANSIENT.V4I3.745-752
Firman, B., handajadi, wiwik, & Maulana, S. (2021). SISTEM PENGENDALIAN MOTOR INDUKSI 3 FASE BERBASIS PROGRAMMABLE LOGIC CONTROL & VARIABEL SPEED DRIVE BERPENAMPIL HUMAN MACHINE INTERFACE. Jurnal Elektrikal, 8(No. 2), 37–44. https://ejournal.akprind.ac.id/index.php/elektrikal/article/view/3799
Mariani, E. M., & hastuti, H. (2020). Kendali Motor Induksi 3 Fasa Menggunakan Arduino Mega Berbasis HMI (Human Machine Interface). JTEIN: Jurnal Teknik Elektro Indonesia, 1(2), 179–186. https://doi.org/10.24036/JTEIN.V1I2.70
Rifaldo, I., & Yuhendri, M. (2022). Sistem Monitoring Kecepatan Motor Induksi Dengan HMI Berbasis PLC. JTEIN: Jurnal Teknik Elektro Indonesia, 3(2), 319–325. https://doi.org/10.24036/JTEIN.V3I2.264
Sulthoni, A., Faqihuddin, M., Cening Nicky Prasada Gayatri, N., Damar Aji, A., Teknik Otomasi Listrik Industri, P., Teknik Elektro, J., Negeri Jakarta Jl Siwabessy, P. G., & Baru, K. U. (2022). Kinerja Modul Latih Sistem Kendali Kecepatan Motor Induksi Berbasis PLC HMI SCADA. ELECTRICES, 4(2), 36–42. https://doi.org/10.32722/EES.V4I2.4671
Supardi, A., Umar, U., Setiyoko, I., & Saifurrohman, M. (2022). Rancang Bangun Sistem Kendali Dan Monitoring Kecepatan Motor Induksi Berbasis Programmable Logic Controller (PLC) Dilengkapi Layar Sentuh. Emitor: Jurnal Teknik Elektro, 22(1), 65–72. https://doi.org/10.23917/EMITOR.V22I1.15784
Susanto, H., & Nurcahyo, A. (2018). DESAIN DAN IMPLEMENTASI SISTEM MONITORING TEGANGAN DAN ARUS MOTOR INDUKSI TIGA PHASE MENGGUNAKAN KONSEP INTERNET OF THINGS (IOT). JURNAL TEKNOLOGI TECHNOSCIENTIA, 54–63. https://doi.org/10.34151/TECHNOSCIENTIA.V11I1.115
Teknik, J., & Itp, E. (2017). Pengembangan Rangkaian Kendali untuk Mengoperasikan Motor Induksi3-Fasa. Jurnal Teknik Elektro, 6(1), 81–86. https://doi.org/10.21063/JTE.2017.3133610
Indonesian Society of Applied Science (ISAS)
