PERENCANAAN WIRE ROPE UNTUK TIANG AGUNG DENGAN KAPASITAS 1 TON KAPAL DHARMA RUCITRA VIII
Keywords:
Wire rope, Stress, Strain, Wire lifeAbstract
Wire rope is one of the most important elements in bracing and moving loads that can withstand tensile forces when holding up tall poles. In this case what needs to be considered is stress and strain, and predicting the life of the wire rope. This study aims to obtain a wire rope planning that is suitable for a capacity of 1 ton. The types of wire rope used in this study are 6x19+1 with a diameter of 12 mm and 6x37+1 with a diameter of 9 mm. The maximum stress produced on wire rope type 6x19+1 is 11.02 kg/mm2, and type 6x37+1 is 18.1 kg/mm2, where the material allowable stress is 36 kg/mm2. The strain on wire rope type 6x19+1 is 23.63 mm and type 6x37+1 is 38.81 mm. The life of wire rope type 6x19+1 is 34.6 months and type 6x37+1 is 17.3 months. The results of this study show that wire rope types 6x19+1 and 6x37+1 are safe to use against the load of the grand pillar. The recommended wire rope is type 6x19+1 with a diameter of mm because it is considered safe to withstand the structure, and has a service life that is in accordance with the ship's maintenance scheduleReferences
Charles G. Salmon & Jhon E. Johnson. (1997). Stell Structure Design and Behaviour. Edisi kedua. Terjamahan oleh Ir. Wira M.S.C.E. Universitas Kristen Indonesia. Penerbit PT. Gelora Aksara Pratama.
Hamsi, Alfian., dkk (2018). Simulasi Perancangan dan Pembuatan Shop Drawing pada Pembangunan Lift Penumpang Kapasitas 20 Orang/1350 Kg. Jurnal Dinamis, 6(2), 9-19.
Kholis, Ikhsan. (2014). Kerusakan Crane Wire rope dan Metode Pemeriksaanya. Swara Patra: Majalah Ilmiah PPSDM Migas, 4(2).
Muin, Syamsir A. (1995). Pesawat-pesawat Pengagkat. Jakarta: PT Raja Grafindo Persada.
Pangestu, Ari. (2021). Analisis Tali Baja Lift Barang Berkapasitas 500 Kg pada Bangunan 2 Lantai. Thesis of Universitas Muhammadiyah Sumatera Utara.
Prasetio, R. D., Syafri, S., & Akbar, M. (2020). Perancangan Ulang Wire rope Pada Sistem Hoisting Overhead Travelling Crane Kapasitas 55 Ton Di Area Crusher PT. Semen Baturaja (Persero) Tbk Indonesia. Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains, 6, 1-5.
Rudenko, N.. (1994). Mesin Pengangkat. Jakarta: Penerbit Erlangga
Saputra, Bima Ade. (2018). Analisa Tegangan Maksimum Wire rope Dan Hook Pada Overhead Hoisting Crane Kapasitas 7,5 Ton. Thesis of Universitas Muhammadiyah Surakarta.
Valta, Rio D. (2022). Analisa Kekuatan Wirerope Ship Unloader di PLTU Pulang Pisau. (Doctoral dissertation, Universitas Islam Kalimantan MAB).
Widyansyah, Arvin & Darmanto. (2021). Analisis Kekuatan Wire rope Pada Hoist Crane Kapasitas 1 Ton di PT Geomed Indonesia. Prosiding SNST Fakultas Teknik, 1(1).
Zayadi, A., & Cahyono, H. P. (2020). Analisis Kekuatan Tali Baja Pada Lift Schindler Kapasitas 1600 Kg. JTK: Jurnal Teknologi Kedirgantaraan, 5(1), 84-91.
Indonesian Society of Applied Science (ISAS)
