PERANCANGAN ALAT BANTU MOBILITAS PASIEN PARALISIS
Keywords:
Paralysis, Mobility Aid, Ergonomic Design, Patient Caregiver Stress, Accessibility in HealthcareAbstract
Paralysis is a paralytic condition that can be caused by various factors, such as stroke, spine injury, and polio. In Indonesia, the number ofparalysis patients is quite high, with stroke disease being the main cause. The study aims to design and analyze the patient lift structurewith a lifting capacity of 150 kg using the ASTM A871-65 material. The design is done by drawing details and performing the voltageanalysis using Autodesk Fusion 360 software. The analysis results show that the arm structure, support, and leg is safe and strong with the resulting voltage being below the material voltage permitted. The size of the tool is 1490 mm × 1675 mm × 720 mm with a weight of 73.3 kg and a crane arm length of 1203.5 mm. The arm drives a hydraulic 57211-2P from the US Jack with a capacity of 1.5 tons. The front and rear wheels are selected from the TENTE brand. The total cost of manufacture of the tool is Rp2,449,425, which consistsof the cost of raw materials of Rp2,061,300 and manufacturing costs of Rp388,125. This research is expected to be a reference in the development of patient lifting aids in the future.
References
Almira, L. M. (2022). Gambaran Stres pada Caregiver Lansia. 51.
Anara, R. (2023). Rancang Bangun Sistem Pengendali Roda Kursi Otomatis dengan Sensor Flex Arduino Berbasis Mikrokontroler. Jurnal Penelitian Rumpun Ilmu Teknik (JUPRIT), Vol.2(No.1).
Apriani, R. A., Purwaningrum, R. D., Prakoso, N. B., Rahmawati, A., Arifai, M., & Anggoro, I. T. (2022). Inovasi Kursi Roda Fleksibel Berdasarkan Otonom Sistem Cerdas untuk Penyandang Cacat dan Lansia Menggunakan Metode PDCA. Seminar dan Konferensi Nasional IDEC (pp. A12.1-A12.5). Suraakarta: Teknik Industri Universitas Sebelas Maret.
Dharmayanti, A. (2021). Perancangan Struktur Hydraulic Crane Kapasitas 250 KG Sebagai Sarana Penunjang Laboratorium Outboard Engine di PPNS.
Devi, L. I. P. S. Asmara, P. Sidi. (2022) “Perancangan Pillar Slewing Jib Crane SWl 2 Ton dan Span 5 Meter,” Proceeding 6th Conference on Design and Manufacture Engineering and its Application.
Eidel, Matthias. dan Kubler, Andrea. (2020) “Wheelchair Control in a Virtual Environment by Healthy Participants Using a P300-BCI Based on Tactile Simulation: Training Effects and Usability,” Frontiers in Human Neuroscience, hal.1-11
Nareza, d. M. (2020). Memahami Paralisis dan Penyebab yang Mendasarinya. Retrieved from Alodokter: https://www.alodokter.com/memahami-paralisis-dan-penyebab-yang-mendasarinya
Ningtyas, L. R. M. Hakam, W. E. Primaningtyas. (2023). Analisis Tegangan dan Besar Defleksi pada Wall Jib Crane Kapasitas SWL 1 Ton Menggunakan Metode Elemen Hingga
Pomalango, Z. B. (2021). Mengangkat dan Memindahkan Pasien. Retrieved from https://dosen.ung.ac.id/00160793/home/2021/3/3/mengangkat-dan-memindahkan-pasien.html
Indonesian Society of Applied Science (ISAS)
