PENGARUH WAKTU SINTERING TERHADAP NILAI KEKERASAN ELEKTRODA TEMBAGA-GRAFIT PADA EDM

Ganesh D, Nitin P, Ravi R, Apurva .K, Aditya M, Ishwar P, Yash B, Vishwajit K, Namrete I. (2023). Experimental analysis of SS316 using brass electrode in electric discharge machine. Viswhakarma Institute of Technology, 411.037.

Zhang S, Wang J, Liu Y, (2020), The role of graphite in improving the wear resistance of metal matix composite, Journal of Materials Science & Technology.

Li J, Chen D, Yang F, (2020), Influence of sintering temperature and time on the micro structure and mechanical properties of titanium-based composites, Journal of Materials Science & Technology, 54, 156-163.

Liu R, Chen C, Zhang Y, (2020), Effect of reinforcement distribution on the mechanical properties of Al-based composites reinforced with SiC nanoparticles, Materials Science and Engineering,773, 138742.

Lee C, Park J, Kim, S, (2019), Influence of sintering parameters on the microstructures and mechanical properties of metal matrix composites reinforced with nano-sized particles, Powder Metalurgy, 62(3), 195-202.

Syukur A, Abdul P, Adhy H, Nur, T, Bambang, Rekayasa elektroda electrical discharge machine dari bahan baku serbuk tembaga dengan proses kompaksi, Jurusan Teknik Mesin Politeknik Negeri Semarang.

Deepanraj, B., Senthilkumar, N., & Thamizharasan, T. (2023). Sintering parameters consequence on microstructure and hardness of copper alloy prepared by powder metallurgy. Elsavier.

Handoko, D., Sutrisno, & Reharmanto, A. (2020). Pengaruh Variasi Tekanan Kompaksi Powder Metallurgy Elektroda Metal Matrix Composites Tembaga-Grafit Terhadap Materiam Removal Rate Dan Electrode Relative Wear Pada Proses EDM Mesin Chimer EZ. Jurnal Mesin Nusantara.

Su, Y., Jiang, F., Wu, F., & Long, M. (2024). Effect of Sintering Temperature on Microstructure and Tribological Properties of Copper/Graphite Composites Doped With Ti3ALC2 Particles. Materials Today Communication, Vol 38, 2024.