ANALISIS PENGARUH INTERAKSI ENGINE PROPELLER MATCHING DALAM MENGOPTIMALISASIKAN PERFORMA PENGGERAK KAPAL IKAN
Keywords:
Propulsion system, Engine Propeller Matching, fishing vessel, hybrid propulsion system, simulasi Computational Fluid Dynamics (CFD)Abstract
With the rapid advancement of science and technology, fishing vessels have experienced significant development, particularly in their propulsion systems. This study addresses the selection of an effective and efficient propulsion system for a previously developed fishing vessel, with principal dimensions of Lpp = 7.798 m, B = 1.575 m, H = 0.678 m, T = 0.4 m, and a block coefficient (Cb) of 0.449. In operation, vessel speed is a crucial factor that greatly affects the effectiveness and success of fishing activities. Fishermen are required to reach fishing grounds as quickly as possible, especially under conditions influenced by tidal currents and the dynamic movement of fish schools. Therefore, an analysis of the propulsion system is essential to improve the performance of fishing vessels. To analyze performance, simulations were conducted using Computational Fluid Dynamics (CFD). Based on the simulation results, a resistance force of 1865 N at a speed of 10 knots requires an engine power of 28 HP. This performance was achieved using a DongFeng S1125 engine coupled with a B3-80 type propeller with a diameter of 0.34 meters.
References
DAFTAR PUSTAKA
Gao, F., Bloch, F., & Brodtkorb, A. H. (2023). Novel combinator surface concept for efficiency optimization of ship propulsion system. Ocean Engineering, 280(September 2022), 114489. https://doi.org/10.1016/j.oceaneng.2023.114489
Gunawan, M. (2024). ANALISIS ENGINE PROPELLER MATCHING PADA KAPAL NELAYAN ANALISIS ENGINE PROPELLER MATCHING. In UNIVERSITAS SULTAN AGENG TIRTAYASA. https://eprints.untirta.ac.id/40085/2/Muhammad Gunawan_3331200089_01.pdf
Hadi, E. S., & Budiarto, U. (2012). Kajian Teknis Propeller -Engine Matching Pada Kapal Ikan Tradisional Dengan Menggunakan Motor Listrik Hybrid Dari Solar Cell Dan Genset Sebagai Mesin Penggerak Utama Kapal Di Kabupaten Pasuruan Jawa Timur. ResearchGate, 5(1), 24–31.
Masruqi Arrazy, & Rindy Primadini. (2021). Potensi Subsektor Perikanan Pada Provinsi-Provinsi Di Indonesia. Jurnal Bina Bangsa Ekonomika, 14(1), 1–13. https://doi.org/10.46306/jbbe.v14i1.24
Pardi, P., & Afriantoni, A. (2017). Fabrikasi Kapal Fiberglass Sebagai Bahan Alternatif Pengganti Kapal Kayu Untuk Meningkatkan Produktifitas Nelayan Di Perairan Bengkalis. Kapal, 14(2), 53. https://doi.org/10.14710/kpl.v14i2.12670
Prasdika, T. O., Bahatmaka, A., Kriswanto, K., & Darsono, F. B. (2025). Analisis Numerik Performa Propulsi Kapal Ikan guna Meningkatkan Efisiensi dan Gaya Dorong Menggunakan Pendekatan CFD (Computational Fluid Dynamics). Jurnal Pendidikan Dan Teknologi Indonesia, 5(5), 1485–1496. https://doi.org/10.52436/1.jpti.771
Santosa, A. W. B., Mausulunnaji, M. F., Setiyobudi, N., Chrismianto, D., & Hadi, E. S. (2022). Engine Propeller Matching Analysis on Fishing Vessel Using Inboard Engine. Journal of Applied Engineering Science, 20(2), 477–484.
https://doi.org/10.5937/jaes0-31979
Tran, T. G., & Kim, H. C. (2023). A study on the matching problem of engine, propeller, and ship hull under actual service conditions. International Journal of Naval Architecture and Ocean Engineering, 15, 100538. https://doi.org/10.1016/j.ijnaoe.2023.100538
Yasim, A., Koekoeh, R., Wibowo, K., & Priohutomo, K. (2021). Study of Main Engine and Propeller Matching on Fishing Vessel After Reparation (Case Study of KM. Nelayan 2017-572). Jurnal Ilmiah Teknologi Maritim, 15(1), 11–20.
Giuseppe Grazioso, Mario Di Stasio , Fabrizio Nicolosi , Salvatore Trepiccione. (2025). A mathematical model for hybrid-electric propulsion system for regional propeller-driven aircraft. Energy Conversion and Management: X 26.
https://doi.org/10.1016/j.ecmx.2025.100957
Thai Gia Tran, Hyun Cheol Kim. (2023). A study on the matching problem of engine, propeller, and ship hull under actual service conditions. International Journal of Naval Architecture and Ocean Engineering 15.
Indonesian Society of Applied Science (ISAS)
